Products
- NEUTRA-CLEAN
Neutra-Clean is an industrial strength, water base sodium meta silicate cleaner for the preparation of bare concrete and coated substrates. Neutra-Clean has a pleasant citrus odour that contains no hazardous solvents, it is concentrated and diluted with water, and prepares the surface for staining, sealing, and re-coating.
Read More ...
- STONE TONE STAIN
Kemiko Stone Tone Stains are not paint, not a pigment or coating stain. The staining process will create a natural stone or mottled appearance. They are made from an acid solution, wetting agents and metallic ions, and this stain when mixed with water reacts (chemically combines) with the lime in concrete to form permanent, long lasting colours that will not fade, chip, or peel. Because this is not an exact pigmented colouring technique, the results cannot be guaranteed. The product is guaranteed to be manufactured correctly .
Stains are best applied with an all-plastic, garden-type pump-up sprayer.
Read More ...
- STONE TONE SEALER
Kemiko Stone Tone Sealer is a high solids (30%) water base Acrylic Urethane sealer with excellent wear qualities. It is designed for interior and exterior use and is non-yellowing and resistant to blush. Stone Tone Sealer provides a natural looking satin finish to surfaces requiring a durable clear coating. It is suggested two thin coats be applied instead of one thick coat. The surface dries in 2-3 hours; however, heavy traffic should be avoided for 24 hours and washing avoided for 48 hours. Stone Tone Sealer can be purchased in Flat or gloss which provides a Matt or Gloss finish. Sealers are best applied with conventional commercial air spray or airless spray equipment utilizing spray gun tip size between .013? - .015? however, professional pump-up sprayers, rollers, lambs wool pads and micro-fibre- pads are optional application methods for trained professionals.
Read More ...
- KEMIKO STA-NATURAL WATER REPELLENT
Sta-Natural is a VOC, extremely user-friendly silane / siloxane emulsion for sealing concrete and cementitious substrates. It is designed to repel water, reduce efflorescence and allows the substrate to breath. It is resistant to UV and high alkalinity exposure. Sta-Natural is applied to properly prepared, stained or bare exterior concrete by spray, roller or brush.
Read More ...
- STONE TONE WAX
Emilio wax is designed for use on porous surfaces (primarily interior) that are unaffected by contact with mineral spirits, such as new and old concrete, unglazed brick and tile, flagstone and unsealed wood. Wax enhances the depth of colour and provides surface protection. The wax is water and dirt resistant . Wax is best applied with a slow speed (175 RPM) floor machine, a natural, stiff bristle brush (Bassine) attachment and a natural medium bristle brush (Palmyra, Union Mix, or Tampico) attachment for buffing.
Read More ...
- KEMIKO EASY SHINE MOP-ON WAX
Kemiko's Easy Shine Wax is a water-based acrylic polymer mop-on floor finish formulated to protect and minimize the scratching of Kemiko and Kemiko Sta-Natural sealers. This maintenance product can be applied by spraying or pouring on the surface and massaging in a figure eight motion onto the floor with a micro-fibre pad. A minimum of two coats are recommended and the drying time is 20-30 minutes.
- SAMPLES
The 8 Stone Tone Stains are available in 500 ml (½ litre) plastic bottles.