Kemiko Easy Shine Mop-On Wax
Description
KEMIKO® EASY SHINE MOP-ON WAX is a low-VOC, extremely user-friendly, waterborne acrylic polymer wax for protecting and maintaining sealed concrete and many other finished substrates.
Easy shine mop-on wax is a single component product that is designed to repel water, reduce scuffing and marring, allows substrate to breath, is low odor, and produces a deep rich shine.
Physical Characteristics
VOC |
Low |
Levelling and Flow |
Excellent. Use Brush, Roll, Mop-On or Spray Applications |
Volume Solids |
26.3% |
Packaging |
1s, 5s |
Flash Point |
None |
Gloss |
High Gloss Finish |
Dry Time |
@70°F 50% RH |
Appearance |
Milky-White Liquid |
Coverage |
1,500 - 2,000 square feet per gallon, per coat |
Thinning |
None Required. Use mild soap and tap water for clean up. |
Surface Preparation
All visible oil, grease, sludge, stain residue and any other contaminants shall be removed prior to any KEMIKO® EASY SHINE application. Surface shall be cured, dry and free from any deleterious matter or grime.
Application Methods
Brush – Use top-quality nylon bristle brush for best film properties.
Roller – Lambswool or similar cover with phenolic core, ¼ - ½ inch nap thickness. Soft lambswool pads
and sponge pads may also be used to evenly spread material.
Spray – Low pressure sprayers or conventional air assisted sprayers set at very low pressure (<10 psi). Backrolling may be necessary to produce even finished film.
Environment – Apply between 50°F & 100°F and 5°F above dewpoint. Do not store in direct sunlight. Protect from freezing. Do not apply to wet or frosted surfaces.
CAUTION
May be irritating to eyes and skin! Wear gloves and eye protection during application. Areas such as decks, sloped concrete, or other surfaces subjected to water may become slippery if coated with KEMIKO® EASY SHINE. If you must seal these surfaces, keep the sealer film build-up to a minimum.
Contact Us for any additional application information.
Warranty
The following warranty is made in lieu of all other warranties, either expressed or implied. This product is manufactured of selected raw materials by skilled technicians. Neither seller nor manufacturer has any knowledge or control concerning the purchaser's use of this product and no warranty is made as to the results of any use. The only obligation of either seller or manufacturer shall be to replace any quantity of this product, which is proved to be defective. Any claim of defective product must be received in writing within one (1) year from date of shipment. Neither seller nor manufacturer assumes any liability for injury, loss, or damage resulting from use of this product.
